Most people assume an outlet that stops working, a light that flickers on and off, or a breaker that will not stay reset is a handyman job. It is not. Those symptoms are electrical faults, and tracing them correctly requires working through the circuit from the panel outward, not just swapping the part that looks wrong. That diagnostic work is what we do in Scottsdale, alongside larger projects like panel upgrades, EV charger installation, and whole-home rewiring.
Scottsdale's housing stock ranges from mid-century ranch homes with wiring that has never been updated to newer construction running solar, battery backup, and multiple high-draw appliances simultaneously. Both ends of that range generate regular electrical calls, and the work looks different at each one. Whether the job is a failed GFCI outlet in a kitchen or a service-entrance upgrade to carry a new solar system, we are available every day from 6:30 AM to 8:30 PM.
Call (623) 999-1238 and the price is confirmed before anything is scheduled.
A garage converted to a workshop, a detached casita, or a pool equipment enclosure all share the same problem: the main panel is too far away and the existing wiring was never sized for the load. A subpanel solves that by giving the outbuilding its own breaker box fed from the main service. We run the feeder, size the subpanel to match what the space will actually draw, and install the breakers for each circuit inside it. The result is a setup that can grow with the space rather than one that trips every time a table saw and a dust collector run at the same time.
An inspection covers the panel, the visible wiring, the outlets, the grounding, and the overall condition of the system. It is useful before a purchase, after a significant storm, or when a property has not had any electrical work reviewed in several years. We document what we find and explain what, if anything, needs attention. For older Scottsdale homes where aluminum branch wiring or outdated panel equipment may be present, an inspection is the right starting point before any larger project is scoped.
Low-voltage work covers the circuits and rough-in that support doorbells, video doorbell systems, data runs, and similar wiring. It is easy to overlook during a remodel and difficult to add cleanly afterward. We handle the rough-in stage so the finish work goes in without exposed conduit or patched drywall.
A 100-amp service was the standard for decades, and it is no longer adequate for a home running central air, an EV charger, and a solar system at the same time. A service upgrade replaces the panel, the meter base, and the service-entrance conductors, and involves coordination with the utility for the meter work. We run a load calculation first so the new service size is matched to what the home actually needs, not just what fits the next size up.
Electrical permits exist because the work affects the safety of a structure and everyone in it. Most panel replacements, service upgrades, new circuit installations, and subpanel additions require a permit in jurisdictions across Maricopa County. Smaller repairs, like replacing a failed outlet or a light fixture on an existing circuit, typically do not.
We handle the permit filing where it applies. That means the work is inspected by the authority having jurisdiction, which protects you as the property owner and confirms the installation meets current code. The timing matters: a permit has to be pulled before the work is roughed in, not after, so the inspection can happen at the right stage of the job.
If you are not sure whether a specific job requires a permit, that is a question worth asking on the call. We will tell you what applies to the scope you are describing.
The process starts on the phone. You describe what you are seeing, we ask the questions that help scope the job, and you get a price before anything is confirmed. We are available every day from 6:30 AM to 8:30 PM, which covers most schedules without requiring time off work. When you call, we find a time that fits and confirm what the visit will cover.
A burning smell near a panel, sparking at an outlet, or a breaker that will not hold under normal load are situations that warrant a call without delay. We take short-notice work, and prompt response, even for last-minute electrical calls, is part of how we operate. Describe what you are seeing when you call and we will work out what the schedule allows.
Rental properties, commercial spaces, and homes with tenants present a specific scheduling consideration: the work has to happen without shutting down the property for longer than necessary. We scope the job to understand which circuits will be affected and for how long, and we talk through that on the call before the visit is set. That way everyone on the property knows which circuits go off and when before the work begins.
Matching new components to what is already in a property is not always straightforward. A panel that was installed decades ago may use breaker types that are no longer manufactured, or a fixture location may have wiring that does not match what a modern replacement expects. We identify what is there before ordering anything.
When a part is obsolete, the options are usually a compatible replacement from a current manufacturer, an upgrade to a section of the circuit that brings it to current standards, or a documented workaround that does not compromise the installation. Aluminum branch wiring is a common example in this area. It is not automatically unsafe, but it requires the right connectors and devices at every termination point, and substituting standard components designed for copper wiring is not a fix.
If something has to be ordered rather than fitted the same day, we tell you that on the call or on site, and we schedule the return visit before we leave. A job that is left half-done because a part was unavailable is not a finished job. A quick read of the electrical services page covers the rest.
The price for any electrical job is shaped by three things: what the fault turns out to be, what has to be opened up to reach it, and whether the existing circuit or panel can carry the change being made. A straightforward outlet replacement is a different scope from the same outlet replacement that reveals a failed junction box buried in the wall. We cannot know which one it is until we see it.
What we can do is give you a clear picture on the call based on what you describe. With a local company, a question about the work gets a straight answer. You get the rate before anything is confirmed, and if the scope changes once we are on site, we tell you before the work continues. The price is explained up front, and any change to it is discussed before it happens.
Call in the morning. Talk it through. Know the options by the end of the call.
Scottsdale is our primary focus in this part of Maricopa County, and we cover the surrounding communities as well. That includes Fountain Hills, Carefree, Paradise Valley, Rio Verde, and Cave Creek. If you are in any of those areas and need electrical work, the call reaches someone who can scope the job and get it on the schedule.
For larger projects, commercial properties, or properties that span multiple locations in the county, the same process applies. You call, we scope the job, and the price is confirmed before anything starts. We are available every day from 6:30 AM to 8:30 PM.
We handle that on a job-by-job basis and can direct paperwork to whatever contact or address you specify. If you manage multiple properties and want to set up a consistent arrangement, mention it when you call and we will work out what makes sense.
Yes. If you need a record of the work for your files, let us know when you call and we will make sure the right contact receives what they need. This is a common request from property managers handling multiple units.
Property managers are a regular part of the work we handle. When you call, we scope the job on the phone, confirm the price, and find a time on the schedule that works around the property's availability. For repairs between tenants, we aim to keep the timeline predictable so you can plan the turnover around it.
Call (623) 999-1238 and we will work out what the schedule allows.
Outdoor outlets in wet or damp locations require weatherproof covers and GFCI protection. Near a pool or pond, there are additional bonding and grounding requirements that apply to the surrounding area, not just the outlet itself. We scope the full situation when you call so the installation meets what the location actually requires.
It can, because the inverter and battery system add to the panel's load and may affect how circuits are arranged. We account for what is already connected when we scope any new work, whether that is adding a circuit, upgrading the panel, or installing an EV charger alongside an existing solar system.
A mixed wiring situation is common in homes that have had additions or partial rewires over the years. The concern is whether the connections between old and new sections are made correctly and whether the older portions still meet the demands being placed on them. An inspection is the right way to find out. We document what is there, identify any connections that need attention, and give you a clear picture of what the system looks like before recommending any work.
Yes. If you want to talk through a situation and understand your options before deciding anything, that is a reasonable way to start. Call us, describe what you are seeing or planning, and we will tell you what the job involves and what the realistic paths forward look like.
Outdoor kitchens and pool equipment each require dedicated circuits sized to the load, with GFCI protection at every outdoor outlet location. Pool pump motors, underwater lighting, and bonding of the pool structure itself are all part of the electrical scope. We handle the circuit work and the bonding, and we can add or extend outdoor lighting circuits at the same time if the project calls for it.
Yes. An unsafe generator connection, such as a backfed extension cord or a direct tie to the panel without a proper transfer switch, is a situation we correct. We install a proper transfer switch and the dedicated circuit that feeds it, which keeps the generator isolated from the utility line when it is running.
We describe what we find and explain what it means for the system. From there, we give you a clear picture of what correcting it involves and what it costs, and you decide how to proceed. We do not leave a known hazard undisclosed.
Electrical faults do not improve on their own. A breaker that trips once and resets is easy to ignore. A breaker that trips twice a week is telling you something about the circuit, and the answer to that question is worth finding before it becomes an emergency.
We are available every day from 6:30 AM to 8:30 PM.
Call (623) 999-1238 for a quote.
The price is confirmed on the call, the scope is explained before anyone shows up, and there are no forms to fill out and no waiting for a callback.
Close by, we also take electrical work in: Sun City, Peoria, Sun Lakes.
See our map of areas.
Below is a look at the electrical work we handle across Scottsdale and the surrounding area. Each service is listed with what it covers, who it fits best, and a practical note to help you decide whether it is the right call for your situation. When you are ready to move forward, pricing is explained on the phone before anything is scheduled.
| Service Type | What It Covers | Ideal For | What to Keep in Mind |
|---|---|---|---|
| Solar & Battery Installation | Conduit and inverter wiringDisconnect and overcurrent protectionPanel upgrade for added solar loadConnection to home circuits | Homeowners connecting a new solar or battery system to their home's electrical supply | We handle the electrical infrastructure side. The panels and battery chemistry are outside our scope, but the wiring that connects the system to your home is work we do regularly in this area. |
| Electrical Panel & Service UpgradesMost Popular | 100-amp to 200-amp service upgradesSubpanel installationLoad calculations before any upgradeMeter base and utility coordination | Homes adding an EV charger, solar system, or second AC unit | Many Scottsdale homes were built when electrical demand was lower. A load calculation tells us exactly what the service needs to carry. |
| EV Charger Installation | Dedicated 240-volt circuit installationPanel capacity check before installOutlet or hardwired connectionCharger circuit sized to spec | Homeowners adding an electric vehicle in Scottsdale or nearby communities | Many older 100-amp panels in this area do not have room for the added load without an upgrade. We check capacity before the charger goes in. |
Call (623) 999-1238 and we will walk through what the job involves and what it costs before anything is scheduled.
(623) 999-1238